Notices - Epson Stylus CX5000 Series Quick Manual

Notices

Important Safety Instructions
Before using your Epson Stylus CX5000 Series all-in-one, read and follow these safety
instructions:
■
Be sure to follow all warnings and instructions marked on the CX5000 Series.
■
Use only the type of power source indicated on the CX5000 Series label.
■ Use only the power cord that comes with the CX5000 Series. Use of another cord
may cause fires or shock. Do not use the cord with any other equipment.
■
Place the CX5000 Series near a wall outlet where the plug can be easily unplugged.
■
Do not let the power cord become damaged or frayed.
■
If you use an extension cord with the CX5000 Series, make sure the total ampere
rating of the devices plugged into the extension cord does not exceed the cord's
ampere rating. Also, make sure the total ampere rating of all devices plugged into the
wall outlet does not exceed the wall outlet's ampere rating.
■
Avoid locations that are subject to rapid changes in heat or humidity, shocks or
vibrations, or dust.
■
Leave enough room around the CX5000 Series for sufficient ventilation. Do not
block or cover openings in the CX5000 Series case or insert objects through the slots.
■
Do not place the CX5000 Series near a radiator or heating vent or in direct sunlight.
■
Place the CX5000 Series on a flat, stable surface that extends beyond its base in all
directions. It will not operate properly if it is tilted or at an angle.
■
Make sure the back of the CX5000 Series is at least 4 inches (10 cm) away from the
wall.
■
Do not open the scanner section while the CX5000 Series is copying, printing, or
scanning.
■ Do not spill liquid on the CX5000 Series.
■
Except as specifically explained in your documentation, do not attempt to service the
CX5000 Series yourself.
46
Notices