Wired (Ethernet) Installation - Epson Artisan 710 Series Network Installation Manual

Wired (Ethernet) Installation

1. Connect an Ethernet network cable to the
2. Connect the other end to any available LAN port on your router, access point,
or hub.
Note:
If you're switching from a wireless to a wired network connection, you need to
disable the wireless adapter using the printer's control panel. Select F Setup on
the printer's control panel, select Network Settings > Wireless LAN Setup >
Advanced Setup > Disable Wireless LAN. Select Yes, then press OK.
3. Continue with the next section to install software.
port on your printer.
LAN (10/100)
Wired (Ethernet) Installation
23