Table of Contents
Advertisement
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the
buttons for at least 10 seconds
simultaneously until the second acoustic
signal:
9.3
Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Inicio/Pausa
button to start the
programme, but it is also
possible to start a washing
programme remotely.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote Start
and the indicator
display for a few seconds.
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
and the
appears on the display.
button
blinks on the
2. Touch the Inicio/Pausa button to
activate the Remote Start before the
indicator
The indicators
and
programme summary screen and the
door is locked. Now it is possible to start
the programme remotely.
When touching the Inicio/
Pausa button after the
indicator
blinking, the Remote Start is
not activated, but the set
programme starts.
To remove the Remote Start, tap on
the Remote Start
by pressing the Inicio/Pausa button.
9.4 Over-the-air update
The App may propose an update for
downloading new features.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
A short tune sounds (if activated). The
programme dial is automatically set on
Algod. programme.
The display shows the programme
duration, the maximum load (for a few
seconds only), the default temperature,
the default spin speed and the indicators
of the phases making up the
programme.
ENGLISH
33
stops blinking.
appear on the
stops
button and confirm
Advertisement
Table of Contents
