Vehicle Speakers; Wireless Headphones - Cadillac 2011 Escalade Owner's Manual

7-46 Infotainment System
AV INPUT: (Audio/Video Input
Jack): The audio/video input jack
is located below the video display
screen and allows viewing of
auxiliary sources such as portable
DVD players, game stations,
or video cameras, on each screen.
Video Input The yellow
connector is used for video
input.
L Audio The white connector
is used for the left side audio.
R Audio The red connector is
used for the right side audio.
Level Lock and Release Latch:
The viewing angle of the video
screen can be adjusted by releasing
the latch and gently moving the
screen. Then lock it into a secure
position.

Vehicle Speakers

Audio from the DVD player or an
auxiliary device can be heard
through the vehicle speakers or
the wireless/wired headphones,
while the radio is tuned to one
of the six frequencies selected
on the Sound Around portion of
the system s remote control.
See Remote Control later in
this section.
Only one audio source can be heard
through the vehicle s speakers at a
time. The audio source being used
is specified by the A/V (audio/video)
source selected on the driver side
head restraint video display screen.
To turn the RSE system audio
output to the vehicle s speakers,
press Sound Around ON, on the
system s remote control. The audio
from the RSE system can be
heard through the wireless/wired
headphones and the vehicle s
speakers at the same time.
The volume on the radio can vary
when switching between the radio,
CD, DVD, MP3, or an auxiliary
device.

Wireless Headphones

The two wireless headphones
included with the Headrest DVD
RSE system will only work with
the Headrest DVD RSE system
and are marked for channel 3 and 4.
The wireless headphones must be
used within a line of sight of the
transmitter that is located above
the video display screen.
3 4 Channel Selector: This is
located on the right earpiece. Either
Channel 3 or 4 can be selected with
the channel selector. The driver side
monitor is designated as Channel 3,
and the passenger side as
Channel 4. Set the channel selector
switch according to the video
display screen being viewed.