Storing Radio Station Presets; Setting The Clock; Entering An Address And Point Of Interest, Storing Preset Destinations - Cadillac 2011 Escalade Owner's Manual

7-6 Infotainment System

Storing Radio Station Presets

To set preset radio stations, do the
following:
1. Press to turn the system on.
2. Press the AUDIO control button
and select the desired band
(AM, FM, or XM (if equipped)).
3. Use the (tuning) knob or
the SEEK arrows to tune to the
desired station.
4. Press and hold one of the five
preset screen buttons, at the
bottom of the screen, until a
beep is heard.
5. Repeat the steps for each
preset.
See Storing Radio Station Presets
under
for more information.

Setting the Clock

The navigation system time and the
analog clock operate independently.
Changing the time through the
navigation system does not change
the time on the analog clock.
See
change the analog clock time.
To set the time for the navigation
system:
1. Press the CONFIG control
button to enter the configure
menu options, then press
CONFIG again, repeatedly
until the time is selected or
touch the time screen button.
2. Press the Hours and Minutes
(minus) and + (plus) signs to
decrease or to increase the time.
See Setting the Clock under
for more information.
Entering an Address and Point
of Interest, and Storing Preset
Destinations
Entering an Address
Enter a destination by inputting the
city name first:
to
1. Press
2. A caution may appear. Press OK
to proceed.
3. Press the DEST control button.
4. Press
5. Select the state/province screen
button, if needed, to change the
current state or province. A list
of all of the available states and
provinces appear. Select the
state or province.
to turn the system on.
(Address Entry).