Page 1
VERTICAL HORIZON VH-SMGMT/VH-SMGMT2 MANAGEMENT MODULE USER GUIDE 9033822...
Page 3
Enterasys Networks reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Enterasys Networks to determine whether any such changes have been made.
Notice FCC NOTICE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
Page 5
WICHTIGE SICHERHEITSHINWEISE (GERMANY) Bitte lesen Sie diese Hinweise sorgfältig durch. Heben Sie diese Anleitung für den späteren Gebrauch auf. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flüssigoder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur Reinigung. Die Netzanschlu ßsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein.
Page 6
This document is an agreement (“Agreement”) between You, the end user, and Enterasys Networks, Inc. (“Enterasys”) that sets forth your rights and obligations with respect to the Enterasys software program (“Program”) in the package. The Program may be contained in firmware, chips or other media.
Page 7
Software-Restricted Rights Clause and its successors, and (iii) in all respects is proprietary data belonging to Enterasys and/or its suppliers. For Department of Defense units, the Product is considered commercial computer software in accordance with DFARS section 227.7202-3 and its successors, and use, duplication, or disclosure by the Government is subject to restrictions set forth herein.
Application of Council Directive(s): Manufacturer’s Name: Manufacturer’s Address: European Representative Address: Conformance to Directive(s)/Product Standards: Equipment Type/Environment: Enterasys Networks, Inc. declares that the equipment packaged with this notice conforms to the above directives. 89/336/EEC 73/23/EEC Enterasys Networks, Inc. 35 Industrial Way...
Guide for more detailed information on managing switches via the serial console. NOTE: The VH-SMGMT2 module is completely compatible with the older VH-SMGMT module, so either can be installed in a VH-2402S or VH-2402S2 switch. Vertical Horizon Management Module VH-SMGMT...
Page 12
2 Description of Hardware VH-SMGMT/VH-SMGMT2...
CAUTION: Do not install these modules in any units other than the VH-2402S/VH-2402S2. Contact Enterasys Networks for advice on newly released switches that may be designed for use with these modules. The VH-SMGMT/VH-SMGMT2 module is field installable. Just follow the instructions below. Package Contents This package includes: •...
Instructions The VH-SMGMT/VH-SMGMT2 Management Module must be installed in the upper slot on the rear panel of the switch. CAUTION: The switch must be powered off before installing or replacing any module. Power off the switch: Disconnect the AC power cord from the switch.
Page 15
Be sure the new module’s front panel is flush with the switch panel. DC INPUT NOTE: The VH-SMGMT/VH-SMGMT2 module can only be installed in the upper slot. Secure the new module: Secure the new module in place by screwing the attached screws clockwise into the switch’s chassis.
Page 16
Refer to the table of LEDs in this guide for a description of the LED indications. Refer to the following manuals for the base unit for further details on using this module: VH-2402S/VH-2402S2 User Guide — connection options and network applications. VH-2402S/VH-2402S2 Management Guide — configuration options. 6 Installing the Module VH-SMGMT/VH-SMGMT2...
APPENDIX A. TROUBLESHOOTING If you experience any problems with the module, check the following items before contacting Enterasys Networks Technical Support: • Ensure that the switch with the module is powered up. • Ensure that the device attached to the module is powered up and operating correctly.
APPENDIX B. TECHNICAL SPECIFICATIONS General Standards Compliance IEEE 802.1D Transparent Bridging Specifications (ISO/IEC 10038) IEEE 802.1p Traffic Class Expediting and Dynamic Multicast Filtering IEEE 802.1Q Virtual Bridged Local Area Networks IEEE 802.2 Local Area Networks, Logical Link Control (LLC) IEEE 802.3 CSMA/CD 9 (ISO/IEC 8802-3) IEEE 802.3x Flow Control Regulatory Compliance Safety: UL 1950, CSA C22.2 No 950, 73/23/EEC, EN 60950, IEC 950...
Port Specifications Console Port Table B-1 shows the console port pin assignments. Table B-1. RS-232 Console Port Pin Assignments No other pins are used. 10 Technical Specifications Signal Name Ground VH-SMGMT/VH-SMGMT2...