Table of Contents
Advertisement
CN8600 User Manual
2. Select the CN8600 in the Device List.
Note: 1. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
2. If there is more than one device in the list, use the MAC address
to pick the one you want. The CN8600's MAC address is located
on its bottom panel.
3. Select either Obtain an IP address automatically (DHCP), or Specify an
IP address. If you chose the latter, fill the IP Address, Subnet Mask, and
Gateway fields with the information appropriate to your network.
4. Click Set IP.
5. After the IP address shows up in the Device List, click Exit.
Browser
1. Set your computer's IP address to 192.168.0.XXX
Where XXX represents any number or numbers except 60. (192.168.0.60 is
the default address of the CN8600.)
2. Specify the switch's default IP address (192.168.0.60) in your browser, and
you will be able to connect.
130
Advertisement
Table of Contents
