Page 1
VIESMANN Installation instructions for contractors Vitoplanar EI2/EI3/EI5 Type EI2.A180DI to EI2.A700DI, EI2.A500M to EI2.A1000M, EI2.A350B to EI2.A700B, EI3.A500GW to EI3.A1000GW, EI3.A350B to EI3.A700B, EI5.A250S to EI5.A1000S Infrared heater VITOPLANAR EI2/EI3/EI5 5855601 GB 2/2020...
Page 2
Safety instructions Please follow these safety instruc- tions closely to prevent accidents and material losses. Safety instructions explained Danger Note This symbol warns against the risk Details identified by the word "Note" of injury. contain additional information. Please note This symbol warns against the risk of material losses and environmen- tal pollution.
Page 3
The appliance may only be commis- ■ Do not lean against the appliance ■ sioned once it has been installed. Do not lean objects against the ■ appliance Auxiliary components and individual parts For replacement, use only spare parts supplied or approved by Viessmann.
Before installation Danger Please note The appliance may fall off the wall if unsuitable Installation on uneven surfaces can cause dam- fixing materials are used. This may result in dan- age to the heating surface due to stress. gerous injuries and damage to the appliance. Only fit the appliance to level walls.
Mounting the appliance on the wall 1. Select the position for the mounting brackets 4. Secure the mounting brackets using suitable rawl depending on the product type and installation plugs and screws. type. See page 9 onwards. 2. Mark the drill holes using a spirit level and drilling template (standard delivery).
Position of mounting brackets Vitoplanar, type EI5.A250S and EI2.A180DI Vertical Horizontal Fig. 4 Fig. 3 Vitoplanar, type EI_.A500_, EI2.A350DI, EI2.A350B and EI3.A350B Vertical Drill holes Fig. 6 Fig. 5...
Page 10
Position of mounting brackets (cont.) Horizontal (only type EI_.A500_ and EI2.A350DI) Fig. 7 Vitoplanar, type EI_.A750_, EI2.A500DI, EI2.A500B and EI3.A500B Vertical Drill holes Fig. 9 Fig. 8 Horizontal (only type EI_.A750_ and EI2.A500DI) Fig. 10...
Position of mounting brackets (cont.) Vitoplanar, type EI_.A1000_, EI2.A700DI, EI2.A700B and EI3.A700B Vertical Drill holes Fig. 12 Fig. 11 Horizontal (only type EI_.A1000_ and EI2.A700DI) Fig. 13...
Electrical connection Connection to wall junction box, alternatively to stand- ard socket Fig. 14 Electrical connection RTH Room thermostat (accessories) Connection via wall junction box Danger On the installation side, install an omnipolar isolator Incorrect wiring can lead to serious injury from with a contact opening width of at least 3 mm in the electrical current and result in appliance dam- permanent electrical installation in accordance with the...
All components must be disposed of correctly. Declaration of Conformity We, Viessmann Werke GmbH & Co. KG, D-35107 Using the serial number, the full Declaration of Con- Allendorf, declare as sole responsible body that the formity can be found on the following website: named product complies with the European directives www.viessmann.co.uk/eu-conformity...