Safety instructions Please follow these safety instructions closely to prevent accidents and material losses. Safety instructions explained Danger Note This symbol warns against the risk of injury. Details identified by the word "Note" contain additional information. Please note This symbol warns against the risk of material losses and environmental pollution.
Page 3
No persons should lean against it ■ The appliance may only be commissioned once it – No objects, e.g. furniture, should be leant has been installed. against it Auxiliary components and individual parts For replacement, use only spare parts supplied or approved by Viessmann.
Intended use also includes adherence to maintenance tion in conjunction with permissible components and inspection intervals. designed for this purpose has been carried out. Product information Vitoplanar EI2 Heat storage for up to 1 hour ■ Type Output in Dimensions...
Before installation Danger Please note Using unsuitable fixing materials may cause the Installation on uneven surfaces can cause dam- appliance to fall off the wall suddenly. age to the heating surface due to stress. Secure the product to the wall using the fixings Only fit the appliance to level walls.
Mounting the appliance on the wall 1. Select suitable hole spacings depending on the product type, as shown on the following pages. 2. Secure the eccentric discs in place using suitable rawl plugs and screws. Danger Using unsuitable fixing materials may cause the appliance to fall off the wall suddenly.
Mounting the appliance on the wall (cont.) Please note Mechanical stress on the surface, e.g. if people or objects lean against it, can lead to damage. Prevent force being applied to the surface. Slide the appliance onto the eccentric discs. The heater is locked in place when you hear a met- allic noise.
Page 8
Electrical connection (cont.) Connection to wall junction box, alternatively to stand- 1. On the installation side, install an omnipolar isola- ard socket tor with a contact opening width of at least 3 mm in the permanent electrical installation in accordance with the installation regulations.
(ErP). Final decommissioning and disposal Viessmann products can be recycled. Components For decommissioning the system, isolate the system and substances from the system are not part of ordi- from the power supply and allow components to cool nary household waste.