Fitting The Thermal Insulation Jacket - Viessmann Vitocell 100-B Installation Instructions For Contractors

Fitting the Solar-Divicon and thermal insulation

Fitting the thermal insulation jacket

2.
3.
4.
Fig. 7
Note
■ 2 people are required for the following work.
■ Ensure that no fleece remnants enter the DHW cylin-
der through the cylinder connections.
1. At the back of the cylinder: Attach 6 clip fasteners
to the edges of the right and left sections of the
thermal insulation jacket. Place the thermal insula-
tion jacket around the cylinder body.
Note
Leave the clip fasteners in the first notch.
10
1.
5.
(cont.)
2. At the front of the cylinder: Attach 5 clip fasteners
to the edges of the right and left sections of the
thermal insulation jacket. 3 clip fasteners at the
top, 2 at the bottom. Leave space for the Solar-Div-
icon.
3. Fit the thermal insulation jacket evenly around the
cylinder body by patting it.
4. Push the clip fasteners at the front of the cylinder
as close together as possible.
5. Push the clip fasteners at the back of the cylinder
as close together as possible.