Closing Off The Sight Glass Aperture On Burners Without Ventilation Connection - Viessmann Vitocrossal 300 Installation Instructions For Contractors

Combustion chamber sight glass
Fig. 27

Closing off the sight glass aperture on burners without ventilation connection

On burners without ventilation connection for sight
glass, the sight glass aperture in the boiler door is
closed off with a plug. The sight glass only serves to
cover the aperture.
Danger
When working with high temperature insulating
materials that contain zirconium or aluminium
silicate ceramic fibres, fibre dust may
develop. This fibre dust can be harmful to
health.
Only trained personnel may adjust or replace
the insulation. Wear suitable protective clothing,
especially breathing equipment and safety gog-
gles.
(cont.)
1.
A
2.
2. Only for burners with ventilation connection:
Connect plastic hose
the fan part of the burner (test port for "static
burner pressure").
1.
Fig. 28
1. Check that the plug is a precise fit. If necessary,
enlarge hole in insulation block.
2. Apply adhesive all around the plug. Insert plug.
Note
Adhesive drying time: 24 hours
with the sight glass and
A
1
2.
31