Related Manuals for Sony FCB-CX980SP
Summary of Contents for Sony FCB-CX980SP
- Page 1 A-D91-100-11(1) Color Camera Module Technical Manual FCB-CX980SP (PAL) FCB-CX980P (PAL) 2009 Sony Corporation...
-
Page 2: Table Of Contents
Table of Contents Features ..............3 Precautions ..............4 Locations of Controls ..........5 Basic Functions ............6 Overview of Functions ..........6 Eclipse ..............29 Eclipse of the Lens ........... 29 Spectral Sensitivity Characteristics ......29 Vibration Specifications ..........29 Key Switch Circuitry .......... -
Page 3: Features
Overview Features • The CCD features 740,000 (FCB-CX980SP) effective picture elements and an image stabilizer for stable shooting with high-resolution. (only for FCB-CX980SP) • The EX-view HAD CCD features 440,000 (FCB-CX980P) effective picture elements and high- sensitivity shooting. The minimum illumination required is 1.0 lux. -
Page 4: Precautions
Overview Precautions In case of abnormal operation, contact your authorized Software Sony dealer or the store where you purchased the Use of the demonstration software developed by Sony product. Corporation or use of the software with customer developed application software may damage hardware, Phenomena specific to CCD image the application program or the camera. -
Page 5: Locations Of Controls
Locations of Controls Locations of Controls Main Unit Front Left side S602 S601 Back Bottom 1 Lens 4 CN601 jack (for key SW) 7 Tripod screw holes 2 CN902 jack 5 TELE button When a tripod is used, please use 7 mm ( in.) or less screws to 3 CN901 jack... -
Page 6: Basic Functions
Basic Functions Basic Functions In general Overview of Functions • Power On/Off Powers the camera on and off. When the power is off, VISCA commands are the basis of camera control. the camera is able to accept only the lowest level of VISCA Commands;... - Page 7 - Normal AF Mode Zoom This is the normal mode for AF operations. The FCB-CX980SP/CX980P employs a 26× optical - Interval AF Mode zoom lens combined with a digital zoom function; this The mode used for AF movements carried out at camera allows you to zoom up to 312×.
- Page 8 Basic Functions • Bright White Balance Variable Iris and Gain (Close to F1.6, 17 steps at White Balance has the following modes, all of which 0 dB: F1.6, 15 steps from 0 to 28 dB) can be set using VISCA Commands. AE –...
- Page 9 Basic Functions AE – Manual When switching from the Shutter Priority mode to the The shutter speed (22 steps), iris (18 steps) and gain Bright mode, the shutter speed set in the Shutter (16 steps) can be set freely by the user. Priority mode is maintained.
- Page 10 Basic Functions Exposure Compensation Auto ICR Mode Exposure compensation is a function which offsets the Auto ICR Mode automatically switches the settings internal reference brightness level used in the AE needed for attaching or removing the IR Cut Filter. mode, by steps of 1.5 dB. With a set level of darkness, the IR Cut Filter is automatically disabled (ICR ON), and the infrared Data...
- Page 11 EVEN, ODD or a Command. User Memory Area A user area of 16 bytes allows you to write data, such The Image Stabilizer Function (FCB-CX980SP as an ID for each customer, data for each system, and only) so on, freely.
- Page 12 Basic Functions Title Display Synchronization methods The camera can be given a title containing up to 20 Internal and external synchronization are available; characters such as “ENTRANCE” or “LOBBY”. The VISCA Commands allow you to switch between them. position of the first character (horizontal, vertical) of •...
- Page 13 Basic Functions Privacy Zone Masking Function Features • Mask can be set on up to 24 places according to Pan/ Privacy Zone masking protects private objects and Tilt positions. areas such as house windows, entrances, and exits • Mask can be displayed on 8 places per screen which are within the camera’s range of vision but not simultaneously.
- Page 14 Basic Functions Privacy Zone Setting Command List Command Packet Command Set Command Comments CAM_PrivacyZone SetMask Setting Mask(Size) 8x 01 04 76 mm nn See “mm: mask setting list”, “nn: setting”, and 0r 0r 0s 0s FF “rr: w, ss: h” in “Parameters” on page 15. Display Setting Mask Display On/Off 8x 01 04 77 pp pp pp pp FF...
- Page 15 Basic Functions Parameters mm: Mask setting list nn:Setting Mask Name mm (Hex) Setting Mask Name mm (Hex) Mask_A Resetting the zone size (the value of w,h) Mask_M for the existing mask. Mask_B Mask_N Setting newly the zone size (the value of Mask_C Mask_O w,h).
- Page 16 Basic Functions Comments: Two different color masks can be Details of Setting Commands chosen. Set Mask The colors can be chosen from among 14 colors Command: 8x 01 04 76 mm nn 0r 0r 0s 0s FF including the possibility for semi-transparency of Parameters: each color.
- Page 17 Basic Functions Alarm Function Grid Use the grid displayed on the screen to set mask This function instructs the camera to detect movement positions (see the figure below). within the monitoring area and then send an alarm By executing the Center Line On command, only the x signal automatically.
- Page 18 Basic Functions ALARM Setting Command List Command Set Command Command Packet Comments CAM _ Alarm 8x 01 04 6B 02 FF Alarm start 8x 01 04 6B 03 FF Alarm stop Set Mode 8x 01 04 6C pp FF Mode Setting *Select one from 13 modes Set Day Night Level 8x 01 04 6D 0p 0p 0p...
- Page 19 Basic Functions Flowchart of 12 Modes Function Mode “00” Set the Focus Position Set to the factory preset Hysteresis. Alarm On Focus Position into memory AE moves Focus moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. Focus goes back to the previous position.
- Page 20 Basic Functions Mode “01” Focus Position into memory Alarm On Hysteresis is set to the factory preset. AE moves. Focus moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. AE does not move for AE does not move for a period of time.
- Page 21 Basic Functions Mode “02” Set to the factory preset Set the AE level Hysteresis. AE Level into memory Alarm On AE moves AE moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. AE goes back to the previous level.
- Page 22 Basic Functions Mode “03” AE level into memory Alarm On Hysteresis is set to the factory preset. AE moves. AE moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. AE does not move for AE does not move for a period of time.
- Page 23 Basic Functions Details of Mode “01”/”03" T1: Reset interval timer (5sec) T2: Detect timer (2sec) T3: High level signal count timer (2sec) Alarm ON Hysteresis Reset Focus Pos AE Level Reset Reset Reset High Signal level...
- Page 24 Basic Functions Mode “04” High output result of mode “00” High output result of mode “02” Low output High output Mode “05” High output result of mode “00” High output result of mode “03” High output Low output...
- Page 25 Basic Functions Mode “06” High output result of mode “01” High output result of mode “02” Low output High output Mode “07” High output result of mode “01” High output result of mode “03” High output Low output...
- Page 26 Basic Functions Mode “08” High output result of mode “00” High output result of mode “02” High output result of mode “02” High output High output High output Low output Mode “09” High output result of mode “00” High output result of mode “02” High output result of mode “03”...
- Page 27 Basic Functions Mode “0A” High output result of mode “01” High output result of mode “02” High output result of mode “02” High output High output High output Low output Mode “0B” High output result of mode “01” High output result of mode “02” High output result of mode “03”...
- Page 28 Basic Functions Day-Night Mode (Mode “0C”) Set the Day-Night Mode and the Day/ Setting by the VISCA Cmd. Night AE level. Starting distinction between Day Alarm On and Night. AE move Brightness is higher than Day AE level Brightness is higher than Night AE level level signal output Low level signal output High...
-
Page 29: Eclipse
Eclipse Spectral Sensitivity Characteristics When designing the housing, refer to the dimensional allowance as shown in the figure below. FCB-CX980SP FCB-CX980P Eclipse of the Lens The eclipse phenomenon occurs with the FCB- CX980P. This is because a sufficient amount of aperture is not available due to the CCD size and the lens structure of the FCB-CX980P. -
Page 30: Key Switch Circuitry
The circuitry shown below is an example. Note that all switches in the figure do not function in all models. For more information, refer to the command list, check functions on the camera, or contact your Sony dealer. S101 S112... -
Page 31: Key Function Specifications
Basic Functions Key Function Specifications Classification Name Function Button operation Mode display ZOOM WIDE Move ZOOM to WIDE side quickly. Pressing repeatedly allowed. ZOOM bar displayed for 3 s. WIDE SLOW Move ZOOM to WIDE side slowly. Pressing repeatedly allowed. ZOOM bar displayed for 3 s. - Page 32 Basic Functions Classification Name Function Button operation Mode display FEATURE FREEZE Capture still image. Switch on/off. FREEZE indication Horizontal reversal Switch on/off. Horizontal reversal REVERSE indication BLACK & Black-and-white output Switch on/off. B&W display WHITE NEGA ART Negative art output Switch on/off.
-
Page 33: Initial Settings, Custom Preset And Backup
Stabilizer On/Off Camera Memory Same as the initial value setting Display On/Off × × Mute On/Off A circle “a” in this column signifies that the data is preserved. A cross “×” signifies that the data IS NOT preserved. FCB-CX980SP only. - Page 34 Basic Functions Custom Back up Mode/Position setting Initial settings preset at standby Title Display On/Off Title Setting — Mask Setting — Mask Display On/Off Mask Color Setting — Alarm On/Off Alarm Mode — Alarm Detect Level — E-Flip On/Off Privacy Zone On/Off Privacy Zone Setting —...
-
Page 35: Mode Condition
Basic Functions... - Page 36 Basic Functions...
- Page 37 Basic Functions...
-
Page 38: Command List
SOFTWARE) AND SPECIFICALLY DISCLAIMS ANY LIABILITY FOR ANY SUCH MALFUNCTION OR DAMAGE. THIS CONTROL PROTOCOL AND COMMAND LIST SHOULD BE USED WITH CAUTION..............................................1) VISCA is a protocol which controls consumer camcorders developed by Sony. “VISCA” is a trademark of Sony Corporation. - Page 39 Command List VISCA Communication assigned address 2 is 82H. In the command list, as the header is 8X, input the address of the camera at X. The Specifications header of the reply packet from the camera assigned address 1 is 90H. The packet from the camera assigned VISCA packet structure address 2 is A0H.
- Page 40 Command List Responses for commands and inquiries Command execution cancel ● ACK message To cancel a command which has already been sent, Returned by the FCB camera when it receives a send the Cancel command as the next command. To command.
- Page 41 Description CAM_VersionInq 8X 09 00 02 FF Y0 50 GG GG HH HH JJ JJ KK FF GGGG = Vender ID (0020: Sony) HHHH = Model ID 0433: FCB-CX980SP 0431: FCB-CX980P JJJJ = ROM revision KK = Maximum socket #(02)
- Page 42 Command List VISCA Command/ACK Protocol Command Command Message Reply Message Comments General Command 81 01 04 38 02 FF 90 41 FF (ACK)+90 51 FF Returns ACK when a command has been accepted, and (Example) (Completion) Completion when a command has been executed. 90 42 FF 90 52 FF 81 01 04 38 FF...
- Page 43 Command List VISCA Camera-Issued Messages ACK/Completion Messages Comments Command Messages z0 4y FF Returned when the command is accepted. (y:Socket No.) Completion z0 5y FF Returned when the command has been executed. (y:Socket No.) z = Device address + 8 Error Messages Comments Command Messages...
-
Page 44: Fcb Camera Commands
Command List FCB Camera Commands Command List (1/4) Command Set Command Command Packet Comments AddressSet Broadcast 88 30 01 FF IF_Clear Broadcast 88 01 00 01 FF CommandCancel 8x 2p FF p: Socket No.(=1or2) CAM_Power 8x 01 04 00 02 FF Power ON/OFF 8x 01 04 00 03 FF CAM_Zoom... - Page 45 Command List Command List (2/4) Command Set Command Command Packet Comments CAM_WB Auto 8x 01 04 35 00 FF Normal Auto Indoor 8x 01 04 35 01 FF Indoor mode Outdoor 8x 01 04 35 02 FF Outdoor mode One Push WB 8x 01 04 35 03 FF One Push WB mode 8x 01 04 35 04 FF...
- Page 46 Title Setting Clear 8x 01 04 74 02 FF Title Display ON/OFF 8x 01 04 74 03 FF CAM_Mute 8x 01 04 75 02 FF Mute ON/OFF 8x 01 04 75 03 FF On/Off 8x 01 04 75 10 FF FCB-CX980SP only.
- Page 47 Command List Command List (4/4) Command Set Command Command Packet Comments CAM_PrivacyZone SetMask 8x 01 04 76 mm nn mm: Mask Settings 0r 0r 0s 0s FF nn 00: Modify, 01: New rr: W, ss:H Display 8x 01 04 77 pp pp pp pp FF Mask Display ON/OFF pp pp pp pp: Mask Settings (0:OFF, 1:ON) SetMask Color...
- Page 48 Command List Inquiry Command List (1/2) Inquiry Command Command Packet Inquiry Packet Comments CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF y0 50 03 FF CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position CAM_DZoomModeInq 8x 09 04 06 FF...
- Page 49 50 0p 0p 0p 0q 0q 0q 0r 0r 0r FF ppp: Day Detect Level qqq: Night Delect Level rrr: Current AE Level CAM_AlarmDetectLevelInq 8x 09 04 6E FF y0 50 01 FF Detect Level “High” y0 50 00 FF Detect Level “Low” FCB-CX980SP only.
- Page 50 Command List Block Inquiry Command List Lens Control System Inquiry Commands ....Command Packet 8x 09 7E 7E 00 FF Byte Comments Byte Comments Byte Comments Destination Address Source Address Focus Near Limit (H) 0 Completion Message (50h) DZoomMode 0: Combine 1: Separate 0: Normal 1: Interval 2: Zoom Trigger...
- Page 51 Command List Camera Control System Inquiry Commands ..Command Packet 8x 09 7E 7E 01 FF Byte Comments Byte Comments Byte Comments Destination Address Gain Position Source Address WB Mode 0 Completion Message (50h) Bright Position Aperture Gain Exposure Mode Exposure Comp.
- Page 52 LR Reverse 1:On 0:Off Camera ID (HL) 1 Terminator (FFh) Privacy Zone 1: On 0: Off Mute 1: On 0: Off Title Display 1: On 0: Off Display 1: On 0: Off Camera ID (LH) FCB-CX980SP only. Camera ID (LL) Picture Effect Mode...
- Page 53 Command List Enlargement Function Query Command ....Command Packet 8x 09 7E 7E 03 FF Byte Comments Byte Comments Byte Comments Destination Address Advanced Privacy (1: AF Interval Time (H) Source Address Provided, 0: Not provided) Alarm (1: Provided, 0: Not provided) 0 Completion Message (50h) Picture flip (1: Provided, 0:...
- Page 54 Command List VISCA Command Setting Values Exposure control (1/2) Gain 28 dB 26 dB NTSC 24 dB Shutter Speed 10000 10000 22 dB 6000 6000 20 dB 4000 3500 18 dB 3000 2500 16 dB 2000 1750 14 dB 1500 1250 12 dB 1000...
- Page 55 Command List Exposure control (2/2) Zoom Ratio and Zoom Position (for reference) IRIS GAIN Bright F1.6 28 dB Zoom Ratio Optical Zoom ×26 Lens Positon Data F1.6 26 dB ×1 F1.6 24 dB 0000 ×2 F1.6 22 dB 1760 ×3 F1.6 20 dB 214C...
- Page 56 Command List Digital Zoom Combine mode Digital Zoom Separete mode FCB-CX980SP: FCB-CX980SP: X26-NTSC X26-PAL X26-NTSC X26-PAL Digital Zoom Digital Zoom Digital Zoom Digital Zoom Digital Zoom Digital Zoom Ratio Position Data Position Data Ratio Position Data Position Data ×1 ×1...
- Page 57 Command List Others R,B gain 00~FF Aperture 00~0F Title setting & Vposition 00 to 0A Hposition 00 to 17 00: Dose not blink Blink 01: Blinks À È Ì Ò Ù Á É Í White Yellow Ó Ú Â Ê Ô...
-
Page 58: Specifications
Specifications Specifications Recommended illumination FCB-CX980SP (PAL) 100 to 100,000 lux Picture elements NTSC: Approx. 630 K pixels S/N ratio 50 dB PAL: Approx. 740 K pixels Back light compensation Horizontal resolution ON/OFF NTSC: 470 TV lines (WIDE end) Electronic shutter speed PAL: 460 TV lines (WIDE end) NTSC: 1/4 to 1/10000 sec. - Page 59 Specifications Recommended illumination FCB-CX980P (PAL) 100 to 100,000 lux Picture elements NTSC: Approx. 380 K pixels S/N ratio 50 dB PAL: Approx. 440 K pixels Back light compensation Horizontal resolution ON/OFF NTSC: 470 TV lines (WIDE end) Electronic shutter speed PAL: 460 TV lines (WIDE end) NTSC: 1/4 to 1/10000 sec.
- Page 60 Specifications Dimensions Front Right side 55.3 88.5 48.3 ±0.1 (30.3) (25) 39.8 ±0.1 4-M2 Depth 3mm or less Left side 85.2 S602 S601 ±0.1 7-M2 Depth 3mm or less 2-M2 Depyh 3mm or less Bottom Tripod Screw. Back Depth 7mm or less 8-M2 Depth 3mm or less (1/4-20UNC) ±0.1...
- Page 61 Specifications Pin assignment CN601 MOLEX 52689-1293 Pin No. Name Level KEY AD0 KEY AD1 KEY AD2 KEY AD3 KEY AD4 CN902 KEY AD5 KEY AD6 1 2 3 4 KEY AD7 CN901 9 8 7 CN901 Pin No. Name Level CMOS 5V (low: max 0.8V, high: min 2.0V) Read Data CMOS 5V (low: max 0.1V,...