Table of Contents
Advertisement
2-1 Locking lever
2-2Display on the Collimator
ILLUSTRATION 8-9
AUTOMATIC COLLIMATOR DISPLAY
om 5184516-100 Rev. 5
The locking lever locks the compensating filters, templates, etc. inserted in the
accessory rails of the multileaf collimator in place to prevent them from falling out
To remove an accessory from the collimator, the locking lever must be pressed in
until the compensating filter, templates etc., can be removed.
Selected = Bucky workstation on Bucky Table or Bucky Wall Stand selected
(1)
Selected = x–ray tube unit selected
(2)
Operating mode:
PBL = with automatic format collimation system
Manual = Without automatic format collimation system
(3)
Ready = ready for operation
(4)
Display of width and height of collimated x–ray field
(5)
Display of film–focus distance (SID)
8-11
Advertisement
Table of Contents
