Enterasys Matrix 7G4270-09 Configuration Manual page 27

QoS Configuration Example
Applying Role and Associated Services to Network Nodes
Once you have created your roles and associated the appropriate services to them, you must apply
the appropriate role(s) to the network nodes as follows:
Router 1
The policy role creation discussed above is appropriate for Router 1 as follows:
• Apply role VoIPCore‐VLAN22 to ports ge.1.2‐5.
Switch 1
VoIPEdge and H323CallSetup roles are applied to Switch 1 as follows:
• Apply role VoIPEdge‐VLAN12 to ports ge.1.10‐13.
• Apply role H323CallSetup to port ge.1.10
CLI Summaries for This QoS Configuration
This QoS configuration can be input from the CLI using the following entries:
Summary of Command Line Input for DFE Router 1
Matrix(su)->set policy profile 1 name VoIPCore-VLAN22 cos 5 egress-vlans
22 tci-overwrite enable
Matrix(su)->set policy rule admin-profile vlantag 22 mask 12 port-string
ge.1.2-5 admin-pid 1
Matrix(su)->set policy rule 1 vlantag 22 mask 12 vlan 22 cos 8
Matrix(su)->set cos port-resource irl 1.1 0 unit mbps rate 25
Matrix(su)->set cos reference irl 1.1 8 rate-limit 0
Matrix(su)->set cos 8 priority 5 tos-value 184.0 txq-reference 8
irl-reference 0
Matrix(su)->set cos state enable
Summary of Command Line Input for DFE Switch 1
Matrix(su)->set policy profile 1 name VoIPEdge-VLAN12 cos 5 egress-vlans
12 tci-overwrite enable
Matrix(su)->set policy rule admin-profile vlantag 12 mask 12 port-string
ge.1.10-13 admin-pid 1
Matrix(su)->set policy rule 1 vlantag 12 mask 12 vlan 12 cos 9
Matrix(su)->set cos port-resource irl 2.1 0 unit mbps rate 1
Matrix(su)->set cos reference irl 2.1 9 rate-limit 0
Matrix(su)->set cos 9 priority 5 tos-value 184.0 txq-reference 8
irl-reference 1
Matrix(su)->set policy profile 2 name H323CallSetup cos 5 tci-overwrite
enable
February 22, 2008 Page 27 of 29