Pioneer AVIC-Z830DAB Operation Manual page 79

Menu Item
[TA OFF]
[Service Follow]*
[On] [Off]
[Soft Link]*
[On] [Off]
[Antenna Power]
[On] [Off]
* This setting is available only when [Digital Radio] is selected as the source.
Description
Disables this function.
Searches for another ensemble that supports
the same service component with better
reception. If no alternative service component
can be found or reception remains poor, the
unit will automatically switch to an identical FM
broadcast. (HARD LINK)
When HARD LINK is unsuccessful, tunes to
another ensemble that supports the similar
service component. If no alternative service
component can be found or reception remains
poor, this function will automatically switch to a
similar FM broadcast.
NOTES
• This setting is available only when [Service Follow] is
set to [On].
• Only available in areas where SOFT LINK function is
supported.
• The broadcast content of the switched channel may
differ from the content of the original channel.
Select whether to output power to a connected
Digital Radio aerial. For details on how to
connect a Digital Radio aerial, refer to the
Installation Manual.
NOTE
This setting is available when the source is turned off.
- 79 -