Pioneer AVIC-Z830DAB Operation Manual page 30

TIP
When entering the coordinates in UTM format, touch
3
Enter the longitude value and touch [GO!].
The searched location appears on the map screen.
4
Touch [Select as Destination].
TIP
You can change the display format of the latitude and longitude to any of the following formats:
decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
NOTE
When a value is already entered in the text field, delete the value first.
Searching for a location by scrolling the map
Specifying a location after scrolling the map enables you to set the position as a
destination or waypoint.
1
Press .
2
Touch and drag the screen to scroll the map.
3
Touch the location that you want to select as your destination.
The cursor appears.
4
Touch [Select as Destination].
Selecting the route options
Once a location is searched, the [Map Location] screen appears. You can select some
options for the route or displayed map location before route calculation.
TIP
If you touch the map, the cursor is placed at that position. Also, you can scroll the map by dragging the
map.
, then [UTM Coordinates].
- 30 -