Denon AVC-S660H Owner's Manual page 211

Contents Connections Playback Settings Tips Appendix
z1 This item can be selected when a Dolby TrueHD signal is played.
z2 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or DTS signal is played.
z3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z4 This item cannot be set when "Dynamic EQ" is set to "On". (v p. 120)
z5 This item cannot be set when Audyssey ® Setup (Speaker Calibration) has not been performed.
z6 This item cannot be selected when the Dolby TrueHD or DTS-HD input signal sampling frequency exceeds 96 kHz.
z7 This item cannot be set when "MultEQ ® " is set to "Off". (v p. 119)
z8 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z9 This setting is available when "Subwoofer Mode" in the menu is set to "LFE+Main". (v p. 152)
z10 This item can be set when "Front" is set to "Small" or "Subwoofer Mode" is set to "LFE+Main". (v p. 147, 152)
211
Front panel Display Rear panel Remote Index