Denon AVC-S660H Owner's Manual page 119

Contents Connections
Audyssey ®
Set Audyssey MultEQ , Audyssey Dynamic EQ
®
Volume . These can be selected after Audyssey
®
performed.
For additional information on Audyssey technology, please see
"Explanation of terms" (v p. 215).
0 "MultEQ ® ", "Dynamic EQ", "Ref.Lev.Offset" and "Dynamic Volume" settings are
stored for each input source.
0 When the sound mode is in the "Direct" mode, "MultEQ
"Dynamic Volume" settings cannot be configured.
Front panel Display
Playback
and Audyssey Dynamic
®
Setup has been
®
® ", "Dynamic EQ" and
119
Rear panel
Settings
o MultEQ ®
MultEQ ® compensates for both time and frequency characteristics of
the listening area based on "Audyssey
Selection is done from three types of compensation curves. We
recommend the "Reference" setting.
Reference
(Default):
L/R Bypass:
Flat:
Off:
0 When using headphones, "MultEQ
Remote
Tips Appendix
® Setup" measurement results.
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
Selects the reference setting, but
bypasses MultEQ ® on the front left and
right speakers.
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Do not use "MultEQ ".
®
® " is automatically set to "Off".
Index