Ethernet Port Aggregation - NETGEAR CAX30 User Manual

Nighthawk AX6 AX2700 WiFI Cable Modem Router Model CAX30
To enable or disable airtime fairness:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. Scroll down below the WPS Settings section and select or clear the Enable AIRTIME
FAIRNESS check box.
Selecting this check box enables airtime fairness. Clearing this check box disables
airtime fairness.
6. Click the Apply button.
Your settings are saved.
If you connected over WiFi to the network, you are disconnected from the network
and must reconnect.

Ethernet Port Aggregation

Ethernet aggregation lets aggregate two Ethernet ports on your router to improve the
aggregated file transfer speed.
To set up Ethernet port aggregation, connect a device that supports Ethernet port
aggregation and 802.3ad to Ethernet aggregate ports 4 and 5 on your router. Note that
Ethernet port aggregation is also referred to as link aggregation, teaming port, and
port trunking.
WARNING: To avoid causing broadcast looping, which can shut down your network,
do not connect an unmanaged switch to Ethernet ports 4 and 5 on your router.
Manage Network Settings 60 User Manual