Russell Hobbs RHEM36G Instructions And Warranty page 12

1. Clock Setting
When the microwave oven is electrified, the screen will display "0:00", buzzer will ring
once.
1) Press "
2) Turn "
3) Press "
4) Turn "
5) Press "
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press"
will go back to the previous status automatically.
2. Microwave Cooking
Press " " once , the screen will display "P100".Press "
turn
"to choose the power you want, and "P100", "P80" "P50", "P30" or "P10"
"
will
display for each added press. Then press"
to
set cooking time from 0:05 to 95:00. Press "
set cooking time from 0:05 to 95:00. Press "
Example: If you want to use 80% microwave power to cook for 20 minutes, you
can operate the oven as the following steps.
1) Press "
2) Press "
3) Press "
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press "
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
" twice to select clock function, the hour figures will flash.
" to adjust the hour figures, the input time should be within 0--23.
", the minute figures will flash.
" to adjust the minute figures, the input time should be within 0--59.
"to finish clock setting. ":" will flash, and the time will light.
" once, the screen display "P100".
" once again or turn"
" to confirm, and the screen displays "P 80".
" to start cooking .
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
confirm, and turn "
"
" again to start cooking.
" again to start cooking.
" to choose 80% microwave power.
", the oven
" repeatedly or
" to