Samsung GALAXY Tab S Basic Manual page 12

Part
Out-camera
Light
Exterior case (side)
Light-emitting part for
remote control
Volume/Shutter key
Power/screen lock key Aluminum
au Micro IC Card (LTE)
slot cover
microUSB connection
terminal
microSD memory card
slot cover
Speaker decoration
Headset connection
terminal
Do not bring the product close to magnetized objects such
as cash cards, floppy disks, credit cards, and prepaid cards.
Doing so might result in loss of recorded information.
Do not allow liquids, metal objects, burnable items, and other
foreign matter to get inside au Micro IC Card (LTE) slot and
the microSD memory card slot. Failure to do so might cause
fire, electric shock, injury or a fault.
Do not swing the product around by holding Samsung TV
antenna cable 02, Samsung TV antenna input microUSB
conversion cable 01, the Stereo Headset, etc. Doing so
might cause an accident or damage.
If you have a weak heart, be careful when setting the
notification vibration and ringtone volume to prevent adverse
effects on your heart.
10
Material Surface treatment
Glass AF coating
Polymethylmethacrylate －
resin
PC Evaporation＋UV
coating
PC －
Aluminum Anodic treatment
Anodic treatment
PC UV coating
SUS －
PC UV coating
STS PVD evaporation
PC －
Pay attention to items becoming stuck to the main unit. The
speaker uses magnets, and so thumbtacks and pins, craft
knife blades, staples, and other metal objects sometimes
become stuck to the main unit, and cause unexpected injury.
Before using the product, be sure to check that there are no
foreign objects on the speaker or other parts.
Do not put the product directly on sand at a beach, etc.
Sand or other small particles might get inside the earpiece,
microphone or the speaker, external connection terminals,
or headset connection terminal, causing the volume to drop.
If sand gets inside this product's main unit, it might cause
overheating or a fault.
When using the product for communication functions, be
careful not to keep the product in direct contact with your
skin for a prolonged period, or not to cover the product with
paper, cloth, bedding, etc. The main unit might get hot,
causing fire, injury or a fault.