Do Not Get Caught In Work Equipment; Precautions Related To Protective Structures - Komatsu HD465-8 Operation & Maintenance Manual

SAFETY
When leaving the machine, always lower the dump body com-
pletely, lock with dump lever lock knob (1), set gear shift lever
(2) to NEUTRAL position (N), set parking brake switch (3) to
"PARKING" position, then stop the engine.
In addition, lock all places and always take the key with you
and keep it in the specified location.
EMERGENCY EXIT FROM OPERATOR'S CAB
The machine equipped with the cab has the doors on its right and left sides. If either door does not open, es-
cape from the other door.
ELECTROMAGNETIC INTERFERENCE
When the machine is operating close to a source of high electromagnetic interference, such as a radar station,
some abnormal phenomena may be observed.
• The display on the monitor panel may behave erratically.
• The warning buzzer may sound.
These effects do not signify a malfunction and the machine will return to normal as soon as the source of inter-
ference is removed.

DO NOT GET CAUGHT IN WORK EQUIPMENT

The clearance in the area around the dump body changes ac-
cording to the movement of the dump body. If you are caught,
this may lead to serious personal injury or death. Do not allow
anyone near any of the rotating or telescopic parts.

PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES

The operator's compartment is equipped with a structure (such as ROPS, FOPS) to protect the operator by ab-
sorbing the impact energy.
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
2-17