Table of Contents
Advertisement
All installations and services must be performed by qualified service personnel.
3. Open all shutoff valves in the gas supply line.
4. Turn "on" the main power at the disconnecting switch and at the furnace power
switch to start the inducer.
5. Follow the "BURNER OPERATION AND ADJUSTMENT" procedure in Section J.
A. WARNINGS AND CAUTIONS:
If you suspect there is a problem with the furnace, pertaining to the
:
venting system or any other related problem, immediately contact a qualified
service agency. If a service agency is not available, contact your fuel
supplier.
Personal injury or property damage could result from major repair
:
or service of this furnace by anyone other than a qualified contractor. The
user should only perform the routine maintenance described in the user
section of this manual.
The area around the furnace should be kept free and clear of
:
combustible materials, especially papers and rags.
Do not block or obstruct air openings on the furnace casing. Do not
:
block or obstruct air openings communicating within the area in which the
furnace is installed.
Do not allow the outside air intake to be blocked or obstructed by
:
vegetation, ice, snow, or any other materials.
Do not use this furnace if any part has been underwater.
:
Immediately call a qualified service agency to inspect the furnace and to
replace any part of the electrical or control system, which has been
underwater.
Should overheating occur or the fuel supply fail to shut off, shut off
:
the manual fuel supply valve to the furnace before shutting off the electrical
supply.
IX. USER INFORMATION SECTION
41
Advertisement
Table of Contents
