Os Installation - Contec BX-M1000 Series Manual

BX-M1000 Pre-installed Model OS Manual(Windows 10 IoT Enterprise 2019 LTSC)

2. OS installation

The USB DVD-ROM Drive will run UEFI boot, and after a short while Windows PE will start up.
[!!! WARNING !!!]
Initialize Storage.
Are you Sure? [Y/N]
I A
CImage Tool for Windows
Copyright<C> 2017 CONTEC CO., LTD.
Version X.X.X.X
Copy swm file: xxxxx.swm
[xx%] copied
A
CImage Tool for Windows
Copyright<C> 2017 CONTEC CO., LTD.
Version X.X.X.X
Copy swm file: xxxx.swm
[100%] Copied
Please Insert next disc [2/2] and type '[Enter]' key.
**************************************
Remove the System Restoration Disk
Press any key to reboot
**************************************
—
Recovery Method
1.
2.
3.
4.
— 51 —
—
When you receive the confirmation message,
please press [Y] key and [ENTER] key.
(If you do not continue the recovery,
press N key.)
HDD/SSD initialization and recovery
processing will be performed automatically.
The screen on the left will appear. Take out the
recovery media (Disc 1 of 2) and insert the
recovery media (Disc 2 of 2), then press
[Enter].
The left DOS prompt appears,
Remove the recovery media (Disc 1 of 2).
Insert the following recovery
media (Disc2 of 2).Press [Enter] key.
Recovery is performed automatically.