Filter Location And Cleaning; Contact Information - Thermo Pride OME-72T36 Installation And Service Manual

Oil-fired furnace down flow & direct vent (sealed combustion)

Table of Contents

All installations and services must be performed by qualified service personnel.

2. EXTERIOR OF FURNACES: The furnace exterior should be inspected for signs of

excessive heat such as discoloration of materials or damage from rust or corrosion.

3. VENT CONNECTOR: The furnace vent pipe should be inspected for signs of rust,

corrosion pitting, or holes in the pipe. Check for leakage around seams in pipe

indicated by soot or condensate streaks.

4. ROOF JACKS: The furnace roof jack should be inspected for signs of rust or

corrosion, pitting or holes, signs of excessive condensation or moisture leaking from

roof jack.

D. FILTER LOCATION AND CLEANING

The air filter should be inspected each month and cleaned when dirty. Cleaning the air

filter frequently may prevent airborne contaminants from going through the furnace and

depositing in the furnace, duct system and interior of the building.

See Figure 9, in this section, for the location of the return air filter.

E. CONTACT INFORMATION:

Installed by:

Date Installed:

INSTALLATION / SERVICE

________________________________________________

Table of Contents

Show Quick Links

Table of Contents

Ome-72d36