Encore ENHWI-G3 User Manual page 20

Ieee 802.11g wireless broadband router

Hide thumbs Also See for ENHWI-G3:

Table of Contents

Step 2: Choose time zone

Select the time zone from the drop down list. Please click "Next" to continue.

Figure 15. Setup Wizard – Set time zone

Step 3: Set LAN and DHCP Server

Set user's IP address and mask. The default IP is 192.168.1.1. If user likes to enable DHCP,

please click "Enabled". DHCP enabled is able to automatically assign IP addresses. Please

assign the range of IP addresses in the fields of "Range start" and "Range end". Please click

"Next" to continue.

Figure 16. Setup Wizard – Set LAN & DHCP Server

Table of Contents

Show Quick Links

Table of Contents

Ieee 802.11gwireless broadband router