Authentication - Encore ENHWI-G User Manual

Ieee 802.11g wireless broadband router

Hide thumbs Also See for ENHWI-G:

Table of Contents

2.2.2 Authentication

This screen enables user to set authentication type for secure wireless

communications. Open System allows public access to the router via wireless

communications. Shared Key requires the user to set a WEP key to exchange data

with other wireless clients that have the same WEP key. This router also supports

WPA and WPA-PSK.

Authentication Type: The authentication type default is set to open system.

There are three options: Open System; Shared Key, WPA and WPA-PKS.

WEP: Enable or Disabled. This is to make WEP enabled or disabled.

Mode: Select the key mode in ASCII or HEX

WEP Key: Select the level of encryption from the drop-down list. The router

supports, 64- and 128-bit encryption.

Key 1 ~ Key 4: Enables user to create an encryption scheme for Wireless LAN

transmissions. Manually enter a set of values for each key. Select a key to use by

clicking the radio button next to the key. Click "Clear" to erase key values.

Table of Contents