Encore ENHWI-N User Manual page 23

General Wireless Advance Settings
Items
Hide SSID
Beacon Period
DTIM Period
RTS Threshold
Fragment Threshold Specifies the maximum size of packet during the
Tx Power
g/b Protection
Support WMM
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
802.11n Wireless advance Settings
Items
HT Operation Mode
HT Channel Bandwidth
HT Guard Interval
Enable HT TX Aggregate
MSDU
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
Information
Mark to disable SSID from broadcasting. As default,
this device broadcasts its SSID to allow every
wireless station located within the coverage of this
wireless router to discover this wireless router easily.
The period of time a beacon is broadcasted (default
100ms).
The beacon of a Delivery Traffic Indication Message
is broadcasted (default 1 beacon).
If the packet size is smaller than the Request To
Send threshold, the wireless router will not send this
packet by using the RTS/CTS mechanism (default
2347 bytes).
data transition. A higher value brings a better
performance (default 2346 bytes)
Select the Transmission Power of very weak, weak,
medium, and strong according to your demand.
Allows the adapters search for 802.11g/b singles
only. Select "Auto" to turns it on or off automatically,
select "Always On" to support protection or select
"Always Off" to disable this function.
To enable/disable Wi-Fi Multimedia function.
Information
Select the mixed or green field mode as the
Hyper Throughput operation mode.
Select the 40MHz or 20MHz as the channel
bandwidth.
Select 400ns or 800ns as the interval time.
Mark to enable Hyper Throughput TX Aggregate
MAC Service Data Unit, and clear to disable.
19