Technical Service; General Safety Instructions - Campbell Hausfeld AF011400 Operating Instructions Manual

OPERATION (CONTINUED)
Fuse Replacement
too much current to the inflator's wiring causing it to overheat, melt or,
possibly, catch fire.
1.
2.
3.

TECHNICAL SERVICE

For information regarding the operation or repair of this product, please visit
www.campbellhausfeld.com

GENERAL SAFETY INSTRUCTIONS

This manual contains information that is very important to know and
understand. This information is provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help recognize this information, observe the
symbols found on page 6. The Safety Symbols throughout this manual are to
alert you to important safety hazards and precautions.
With any piece of equipment, new or used, the most important part of its
operation is SAFETY!
Campbell Hausfeld encourages you to familiarize yourself with your new
equipment and stresses safe operation.
The next few pages of this manual are a summary of the main safety aspects
associated with this unit. Be sure to read and understand completely before
operating the machine.
The symbols used throughout the operation and maintenance sections of
this manual call attention to safety procedures.
California Proposition 65
•
Unscrew end of plug counter-clockwise to remove fuse.
If fuse is blown, replace with a new 15-amp fuse. Always replace a blown
fuse with the same size fuse.
Reassemble plug. Do not over-tighten.
The DANGER, WARNING, CAUTION, and NOTICE notifications
and instructions in this manual cannot cover all possible condi-
tions and situations that may occur. It must be understood by
the operator that caution is a factor which cannot be built into
this product, but must be supplied by the operator.
This product or its power cord may contain chemicals known to the State
of California to cause cancer and birth defects or other reproductive
harm. Wash hands after handling.
Never replace a blown fuse with a fuse having a
higher rating. Using a higher rated fuse will transmit
4