Emerson CKD9908 Owner's Manual page 13

CKD9908 O/M.QXD 1/29/01
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be played.
1
Turn the unit on and slide the
FUNCTION switch to the CD position.
3
2
Press the PROG button
memorize the track. Repeat steps 2
and 3 to program additional tracks up
to a maximum of 20 tracks. Press the
PLAY/PAUSE (
program playback and adjust the
VOLUME control
NOTES:
• Press the REPEAT button twice during program playback to repeat the
program repeatedly until the STOP ( ) button is pressed.
• Press the STOP ( ) button to stop the disc before it is finished.
• To cancel program play, while in stop mode, press the PROG button until the
PROG indicator blinks, then press the STOP ( ) button.
• Each track may be stored in the program memory as many times as desired
(up to 20 tracks).
2:43 PM Page 13
OPERATION
2
Press the PROG button
appear in the display and the PROG
indicator will blink. Within 8 seconds, press
the SKIP/Search
select the desired track to program.
4
3
1
to To skip forward or backward through
the programs, press the SKIP/Search
through playing, it will stop.
) button to begin
as desired.
13
1
, "P 01" will
or button
or button. When the disc is
2
2
to