Configuration; Decimal Point Selection; Figure 5.1 Display Board Jumper Locations - Omega DP3001 User Manual

5.0

CONFIGURATION

Select the desired configurations from the following charts. Install jumpers and
open/close solder switches as indicated. Remove all push-on jumpers not used.
5.1

DECIMAL POINT SELECTION

Decimal Point
1.9999
19.999
199.99
1999.9

Figure 5.1 Display Board Jumper Locations

Alternate decimal point configuration
S1
using main board connector J1.
A Connect K to L
B Connect J to L
C Connect H to L
D Connect F to L
9