Removing Solder From Between Pins; Terminal Guide Of Ics, Transistors And Diodes - Panasonic KX-TDA0142CE Service Manual

tip so that it flows under the pins as they are heated.

14.3. REMOVING SOLDER FROM BETWEEN PINS

1. Add a small amount of solder to the bridged pins.
2. With a hot iron, use a sweeping motion along the flat part of the
pin to draw the solder from between the adjacent pads.
15. TERMINAL GUIDE OF ICS, TRANSISTORS AND
DIODES
PDF created with pdfFactory Pro trial version
38
www.pdffactory.com