VIp
VI
p
3
3 p
pe ese ses
s
Fig 1
Fig 1
Fig 2
Fig 2
SaVING aND rENamING prESEtS
SaVING aND rENamING prESEtS
1.
1.
T
T
o save a preset you have edited, first press and hold the Preset Encoder for 2 seconds, then
o save a preset you have edited, first press and hold the Preset Encoder for 2 seconds, then relea
The screen will now look like Fig 1.
The screen will now look like Fig 1.
2.
2.
In this
In this
mode, the bottom row
mode, the bottom row
display reads "Turn Stomp=NEXT BANK" meaning that the inst/stomp encoder is used to quickly scroll
display reads "Turn Stomp=NEXT BANK" meaning that the inst/stomp encoder is used to quickly scroll
through the banks allowing you to choose the desired bank in which to save the current preset (See Fig. 2).
through the banks allowing you to choose the desired bank in which to save the current preset (See Fig. 2).
3. The amplifiers and effects encoders are used to
3. The amplifiers and effects encoders are used to
the cursor and use the effect encoder to change the chosen character (See Fig 3 and Fig 4).
the cursor and use the effect encoder to change the chosen character (See Fig 3 and Fig 4).
To save the preset, simply press the PRESET ENCODER.
To save the preset, simply press the PRESET ENCODER.
NOtE:
NOtE:
a n ie ding
a n ie ding s
nd en o nol l.
nd en o nol l.
Fig 3
Fig 3
Fig 4
Fig 4
You
You c
can now rename and save your preset.
an now rename and save your preset.
on the display
on the display
scrolls through different
scrolls through different c
rename the preset.
rename the preset.
sve ode ess he t
ve ode ess he
commands.
ommands.
In this
In this
Use the amplifiers encoder to move
Use the amplifiers encoder to move
tap tEmpO on o cncel o of sve ode
ap tEmpO on o cncel o of sve ode
release.
se.
example, the
example, the