Peavey Vypyr VIP Series Operating Manual page 10

5 5 6 6
1 1 2 2
ampS ENCODEr ampS ENCODEr
3 3
Turn this knob to select your amp model. Turn this knob to select your amp model.
gain channel, yellow for medium gain and green for low gain. gain channel, yellow for medium gain and green for low gain.
Bank C) only the acoustic amplifiers will be available. Bank C) only the acoustic amplifiers will be available.
bass amplifiers will be available. bass amplifiers will be available.
The LEDs around the Amp encoder will tell you what note you The LEDs around the Amp encoder will tell you what note you ar
Effects encoder (Item 4) will indicate whether the note is sharp or Effects encoder (Item 4) will indicate whether the note is sharp or
position you are sharp (tune down). position you are sharp (tune down).
When all of the LEDs around the Effects encoder come on, you are in tune. When all of the LEDs around the Effects encoder come on, you are in tune.
EFFECtS ENCODEr EFFECtS ENCODEr
4 4
Turn Turn
amplifier. amplifier.
prE GaIN prE GaIN
5 5
Turn this knob to crank up the gain—think of it as how much distortion you want out of the amplifier. In Edit Turn this knob to crank up the gain—think of it as how much distortion you want out of the amplifier. In Edit
mode this knob controls parameter 1 of either the selected Stompbox or Effect. mode this knob controls parameter 1 of either the selected Stompbox or Effect.
NOtE: NOtE:
LOW ENCODEr LOW ENCODEr
6 6
Low EQ adjustment. Low EQ adjustment.
mID ENCODEr mID ENCODEr
7 7
Mid EQ adjustment. Mid EQ adjustment.
number of times the delay repeats. number of times the delay repeats.
7 7 8 8
1 1 3 3
this knob to select any "Rack" effect. this knob to select any "Rack" effect.
Press the encoder momentarily to Press the encoder momentarily to
this conol s e low on he acos this conol s e low on he
In edit mode this knob controls parameter 2 of either the In edit mode this knob controls parameter 2 of either the s
In edit mode this In edit mode this
9 9
1 1 4 4
Each amp has 3 channels: if the LED is red, you are on the high Each amp has 3 channels: if the LED is red, you are on the high
If you are using a bass If you are using a bass
Press and hold for 2 seconds to enter tuner mode. Press and hold for 2 seconds to enter tuner mode.
If the LED is to the left of If the LED is to the left of
These are effects you might find attached to the effects These are effects you might find attached to the effects
enter Edit mode. enter Edit mode.
acosic nd bss eses o llow fo clen ndisoed sonds. ic nd bss eses o llow fo clen ndisoed sonds.
knob controls the F knob controls the Feedback of the Delay effect. eedback of the Delay effect.
10 10
1 1 5 5 1 1 6 6
When you are using an acoustic When you are using an acoustic
preset (Item 1, Bank D) only the preset (Item 1, Bank D) only the
are tuning. e tuning. At the same time the LEDs around At the same time the LEDs around
flat. flat. If the LED is to the If the LED is to the ri
the 12:00 position you are flat (tune up). the 12:00 position you are flat (tune up).
selected Stompbox or Effect. elected Stompbox or Effect.
Feedback is the Feedback is the
preset (Item 1, preset (Item 1,
right of the 12:00 ght of the 12:00
loop of an loop of an