Brother DCP-T226 Online User's Manual page 220

Home > Machine Settings
Settings > Set Sleep Mode Countdown
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep
Mode, it acts as if it is turned off. The machine will wake up and start printing when it receives a print job. Use
these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
• The timer will restart if any operation is carried out on the machine, such as receiving a print job.
• The factory setting is five minutes.
1. Start Brother iPrint&Scan.
• Windows
Launch (Brother iPrint&Scan).
• Mac
In the Finder menu bar, click Go > Applications, and then double-click the iPrint&Scan icon.
The Brother iPrint&Scan screen appears.
2. If your Brother machine is not selected, click the Select your Machine button, and then select your model
name from the list. Click OK.
3. Click (Machine Settings) to configure the settings.
4. If required, type the password in the Login field, and then click Login.
The default password to manage this machine's settings is located on the back of the machine and marked
"Pwd".
5. Go to the navigation menu, and then click General > Sleep Time.
Start from , if the navigation menu is not shown on the left side of the screen.
6. Enter the Sleep Time field (1-60).
7. Click Submit.
Related Information
• General Settings
Related Topics:
• Set the Machine to Power Off Automatically
• Access Web Based Management
> Change Machine Settings Using Web Based Management > General
216