Brother DCP-T226 Online User's Manual page 121

Error Code Problem and Recommended Solutions
TS-06 The wireless security information (Authentication method / Encryption method / Network Key) is
incorrect. Check the following points and try to set up your wireless connection again:
1. Confirm the Network Key. If your Network Key contains upper-case and lower-case letters,
2. Confirm whether the authentication method entered and the authentication method or
3. If the network key, authentication method, and encryption method have been confirmed,
4. If the machine is still unable to connect and your router supports WPS, try connecting with
TS-07 The machine cannot detect a wireless router/access point that has WPS enabled. Check the
following points and try again:
1. To check if your wireless router/access point supports WPS, look for the WPS symbol
2. To set up your wireless connection using WPS, you must configure both your Brother
3. If you do not know how to set up your wireless router/access point using WPS, see the
TS-08 Two or more wireless access points that have WPS enabled are detected. Check the following
points and try again:
1. Make sure that only one wireless router/access point within range has WPS enabled, and
2. Try to connect again after a few minutes to avoid interference from other access points/
How to confirm wireless security information (SSID/authentication method/encryption method/Network Key)
of your WLAN access point/router:
1. The default security settings may be provided on a label attached to the WLAN access point/router. Or
the manufacturer's name or model number of the WLAN access point/router may be used as the default
security settings.
2. See the documentation provided with your WLAN access point/router for information on how to find the
security settings.
• If the WLAN access point/router is set to not broadcast the SSID, the SSID will not automatically be
detected. You will have to manually enter the SSID name.
• The Network key may also be described as the Password, Security Key, or Encryption Key.
If you do not know the SSID and wireless security settings of your WLAN access point/router or how to
change the configuration, see the documentation provided with your WLAN access point/router, ask the
manufacturer of your access point/router or ask your Internet provider or network administrator.
Related Information
• Print the WLAN Report
Related Topics:
• If You Are Having Difficulty with Your Machine's Network
• Print the Network Configuration Report
make sure you type them correctly. Brother cannot provide this information.
encryption method supported by the wireless router/access point are the same.
restart your wireless router/access point and Brother machine.
WPS. To set up your wireless connection using WPS, you must enable WPS on the Brother
machine and wireless router/access point.
displayed on the router/access point. For more information, see the documentation provided
with your wireless router/access point.
machine and the wireless router/access point.
documentation provided with your wireless router/access point, or contact the router
manufacturer, your system administrator, or Internet service provider.
then try to connect again.
routers.
117