Firmware Update - Canon E4200 Series Online Manual

Firmware update

Select this menu from Device settings in Setup menu.
You can update the firmware of the printer, check the firmware version, or perform settings of a notification
screen.
Important
• When you use this function, make sure the printer is connected to the internet.
Note
• Only Current version is available when Inactive is selected for Enable/disab. Wi-Fi in Wi-Fi under
LAN settings.
• Install update
Performs the firmware update of the printer. Follow the on-screen instructions to perform update.
Note
• If the firmware update is not complete, check the following and take an appropriate action.
• Check the network settings such as a wireless router.
• If Cannot connect to the server; try again is displayed on the LCD, press the OK button and
try again after a while.
• Current version
You can check the current firmware version.
• Update notification
When ON is selected and the firmware update is available, the screen to inform you of the firmware
update is displayed on the LCD.
• DNS server setup
Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup,
follow the display on the LCD to perform settings.
• Proxy server setup
Performs settings for a proxy server. Select Use or Do not use. If you select Use, follow the display on
the LCD to perform settings.
201