Table of Contents
Advertisement
4. Select Scan contrast, press the OK button (D).
5. Use the
button (C) to change the contrast, then press the OK button (D).
Network Status Indication
Wi-Fi setting and the network status indicate by the icon.
If the
icon appears on the LCD when the SCAN button or Setup button is pressed, it indicates
that Wi-Fi is enabled and the printer is connected to the wireless router.
Depending on the signal state, the icon will change.
Note
• When Wi-Fi is disabled,
Signal strength: 81 % or more
You can use the printer over Wi-Fi without any problems.
Signal strength: 51 % or more
The problem such as the printer cannot print may occur according to the network sta-
tus. We recommend placing the printer near the wireless router.
Signal strength: 50 % or less
The problem such as the printer cannot print may occur. Place the printer near the
wireless router.
Wi-Fi is enabled but the printer is not connected to the wireless router.
icon is not displayed.
172
Advertisement
Table of Contents
