Gigabyte B450 AORUS ELITE V2 User Manual page 25

& Core Performance Boost
Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU
performance-boost technology. (Default: Auto)
& AMD Cool&Quiet function
Enabled L ets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to
reduce heat output from your computer and its power consumption. (Default)
Disabled Disables this function.
& SVM Mode
Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems
and applications in independent partitions. With virtualization, one computer system can function as multiple
virtual systems. (Default: Disabled)
& PPC Adjustment
(Note 1)
Allows you to fix the PState of the CPU. (Default: PState 0)
& Global C-state Control
Allows you to determine whether to let the CPU enter C states. When enabled, the CPU core frequency
will be reduced during system halt state to decrease power consumption. (Default: Auto)
& Power Supply Idle Control
Enables or disables Package C6 State.
Typical Current Idle Disables this function.
Low Current Idle Enables this function.
Lets the BIOS automatically configure this setting. (Default)
Auto
& CCD Control
(Note 1)
Sets the number of CCDs to be used. (Default: Auto)
& CPPC
(Note 1)
Enables or disables the CPPC feature. (Default: Auto)
& CPPC Preferred Cores
Enables or disables the CPPC Preferred Cores feature. (Default: Auto)
& Opcache Control
(Note 1)
Enables or disables Opcache. Auto lets the BIOS automatically configure this setting. (Default: Auto)
& Downcore Control
Allows you to select the number of CPU cores to enable (the number of CPU cores may vary by CPU).
Auto lets the BIOS automatically configure this setting. (Default: Auto)
& SMT Mode
Allows you to enable or disable the CPU Simultaneous Multi-Threading technology. This feature only works
for operating systems that support multi-processor mode. Auto lets the BIOS automatically configure this
setting. (Default: Auto)
& Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Uses Profile 1 settings.
Profile1
Uses Profile 2 settings.
(Note 2)
Profile2
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
(Note 1)
(Note 2)
- 25 -