Error Display - Clarion VX316AU Owner's Manual

22. ERROR DISPLAY

Display
LOAD ERROR
DISC ERROR
NO FILE
CURRENT FILE NOT
SUPPORTED
REGION CODE ERROR
DEVICE ERROR
OVER CURRENT
NO FILE
CURRENT FILE NOT
SUPPORTED
NO BLUETOOTH DEVICE
NO VIDEO SIGNAL
Cause
A disc is caught inside the CD
deck and is not ejected.
A disc cannot be played due to
scratches, etc.
A disc is loaded upside-down
inside the CD deck and does
not play.
No supported file in the CD
An unsupported file is being
played on the head unit.
DVD is not support in your
country.
The connected device is not
supported.
An error occurred when
controlling the device.
The device is connected via the
USB Hub.
Over-current or data error is
detected.
No files in the device.
An unsupported file is being
played on the head unit.
A2DP is not connected to the
unit.
DVB-T2 receiver is not
connected to the unit.
Video input is not connected to
the unit.
HDMI input is not connected to
the unit.
Measure
This is a failure of CD deck's
mechanism.
Consult your nearest service
dealers.
Replace with a non-scratched,
non-warped-disc.
Eject the disc then reload it
properly.
Use a CD with files.
Use a CD with supported file
formats.
Use a CD with correct region
code.
If the device is frozen, disconnect
it, and reconnect it again.
Connect a proper device.
Disconnect the device, and
reconnect it again.
Disconnect the device, and
reconnect directly to the
connector of this unit without
using the USB Hub.
Turn off the ignition switch,
disconnect the device, restart the
engine and reconnect it again. If
the device is still not recognized,
try replacing with a different
device.
Use a device with files.
Use a device with supported file
formats.
Disconnect and reconnect the
device to the unit.
Connect the receiver/input to
the unit.
VX316AU 45