Canceling a Connection with a
Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected
Disconnected
30
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1. Y
Tap the "OCEANUS Connected" icon.
2. X
Hold down (C) for at least 3.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Unpairing
Unpairing the watch from a phone requires
both OCEANUS Connected and watch
operations.
Note
If you are using an iPhone, also delete
●
the pairing information stored on the
phone.
Watch Operation Guide 5652
Deleting Pairing Information from
●
OCEANUS Connected
1. X
If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
30
2. Y
Tap the "OCEANUS Connected" icon.
3. Y
Perform the operation shown on the
phone screen to unpair.
Deleting Pairing Information from the
●
Watch
1. X
Enter the Timekeeping Mode.
Navigating Between Modes
l
2. X
Pull out the crown to the second click.
3. X
Hold down (B) for at least 10 seconds.
This deletes the pairing information. The
second hand will point to [C].
4. X
Push the crown back in.
iPhone Only
●
Deleting the phone's pairing
information
For details about setting procedures, see your
phone documentation.
"Settings"
watch's device registration.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
Deleting Pairing Information from the
l
Watch
Pair the watch with a phone.
l
C
Disconnected
30
"Bluetooth"
Cancel the
n
n
World Time
World Time lets you look up the current time
in any one of 27 cities and 38 time zones
around the globe.
30
World Time City Setting
Use the procedure below to specify the city
(time zone) whose time you want to view.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Pull out the crown to the first click.
The second hand indicates the currently
selected World Time City, while the mode
hand indicates the World Time City's
summer time setting.
World Time City (time zone)
3.
Rotate the crown to change the World
Time City (time zone).
The small hour and minute hands will
indicate the current time in the World Time
city you selected.
If the name of the city you want to
●
specify is not shown, you can specify a
time differential (time zone).
For information about time differential
●
(time zones) you can specify, refer to
the information at the link below.
City (Time Zone) List
l
World Time hour (24-hour)
World Time hour and minute
4.
Push the crown back in.
30
Crown
Summer time setting
30
Crown
12