Phone Finder; Configuring Watch Settings; Changing The Home City Summer Time Setting; Checking The Watch Charge Level - Casio 5652 Operation Manual

Phone Finder

You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Phone finder will not sound the tone
●
unless OCEANUS Connected is
running on the phone.
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
If the watch is connected with a phone,
press any button to terminate the

connection.

Connected Disconnected
30
2. X
Hold down (C) for at least one second.
This will cause the watch to enter the
Timekeeping Mode.
3. X
Hold down (B) for at least 4.5 seconds
until the second hand points to [C].
A connection will be established between
the watch and phone, and then the
phone's ringtone will sound.
It will take a few seconds before the
●
phone tone sounds.
4. X
Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone, but only during the first
30 seconds after it starts to sound.
Watch Operation Guide 5652

Configuring Watch Settings

You can use OCEANUS Connected to specify
the amount of time until the Bluetooth
connection is automatically terminated, and to
configure other settings.
1. Y
Tap the "OCEANUS Connected" icon.
2. X
Hold down (C) for at least 3.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3. Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
30
1. Y
Tap the "OCEANUS Connected" icon.
2. X
Hold down (C) for at least 3.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with OCEANUS Connected.
1. Y
Tap the "OCEANUS Connected" icon.
2. X
Hold down (C) for at least 3.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3. Y
Use OCEANUS Connected to check the
charge level.
Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l C
1.
Move the phone close to (within one meter
of) the watch.
2. X
While the second hand is not pointing to
[C], hold down (C) for least 3.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
Important!
If you have problems establishing a
●
connection, it could mean that
OCEANUS Connected is not running
on your phone. On your phone's home
screen, tap the "OCEANUS
Connected" icon. After the app starts
up, hold down the watch's (C) button
for at least 3.5 seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
OCEANUS Connected: "Watch
settings" "Connection time". Next,
n
select a setting of 3 minutes, 5 minutes,
or 10 minutes.
11