Toshiba RBM-BT14UL Installation Manual

1 English
INSTALLATION MANUAL
SUPER MODULAR MULTI SYSTEM AIR CONDITIONER
T-shape branching joints (For R410A)
Model name: RBM-BT14UL, RBM-BT24UL
Please read and follow the "PRECAUTIONS FOR SAFETY" in the installation manual for the air conditioner.
• Make sure all the parts listed in the table are included in the package.
• Read the installation manual for the air conditioner regarding the selection of the size and material of the refrigerant pipes.
• Ask an authorized dealer or qualified installation professional to install this product.
• Installation work must be carried out by following this installation manual and using exclusive tools and pipes for the refrigerant R410A.
Parts Table
NOTE
1 ( ): indicates outer diameter.
2 For the sockets, the side with a notch is the one to connect a pipe. (
Notch
Socket
External
Diameter of the
diameter of
connecting pipe
socket
Gas side joint
Ø1 1/8"
Ø1 3/8" Ø1 1/4"
27 59
(Ø1 1/4")
RBM-
(Ø1 1/4")
BT14UL
(Brazed locally) (Ø1")
Ø1 1/8"
Ø1 1/8"
No. Specifications No. Specifications
Ø1 3/8"×(Ø1 1/4") (Ø1 1/8")×Ø7/8"
1 pc
59 43
Socket [Ø 34.9×(Ø31.8)] [(Ø 28.6)×Ø22.2]
Ø1 1/8"×(Ø1 1/4")
1 pc
27
[Ø 28.6×(Ø31.8)]
L-pipe (Ø1")×Ø1 1/8"
Joint Joint 1 pc
[(Ø 25.4)×Ø28.6]
Heat
Heat insulator for joint 1 pc Heat insulator for L-pipe
insulator
61 62 62 61
Ø1 1/2"
(Ø1 1/2") (Ø1 1/2") (Ø1 1/2") (Ø1 1/2")
Ø1 3/8" Ø1 5/8"
RBM- Ø1 5/8" Ø1 3/8" Ø1 1/8"
Ø1 1/2"
BT24UL
L-pipe
(Ø1 1/2")
(Ø1 1/8")
(Ø1 1/2")
(Brazed locally) (Ø1 1/8")
Ø7/8"
Ø1 1/8"
43
No. Specifications No. Specifications
Ø1 5/8"×(Ø1 1/2") (Ø1 1/2")×Ø1 5/8"
1 pc
62 62
[Ø41.3×(Ø38.1)] [(Ø38.1)×Ø41.3]
Ø1 3/8"×(Ø1 1/2") (Ø1 1/2")×Ø1 3/8"
1 pc
61 61
[Ø34.9×(Ø38.1)] [(Ø38.1)×Ø34.9]
Socket
(Ø1 1/2")×Ø1 1/8"
71
[(Ø38.1)×Ø28.6]
(Ø1 1/2")×Ø7/8"
73
[(Ø38.1)×Ø22.2]
(Ø1 1/8")×Ø7/8"
43
[(Ø28.6)×Ø22.2]
L-pipe (Ø1 1/4")×Ø1 1/8"
Joint Joint 1 pc
[(Ø31.8)×Ø28.6]
Heat
Heat insulator for joint 1 pc Heat insulator for L-pipe
insulator
Thank you for purchasing the "Branching
Joint" for TOSHIBA Carrier Air
Conditioner. Before starting the
installation work, please read this manual
carefully and install the product properly.
, , : without notch)
61 62
59
Liquid side joint
Ø7/8"
(Ø3/4") (Ø3/4")
3-Ø3/4"
43
(Ø1 1/8")
13 10
Ø5/8" Ø1/2"
L-pipe
(Ø3/4")
(Ø1 1/8")
10
Ø7/8"
Ø1/2"
43
No. Specifications No. Specifications
Ø5/8"×(Ø3/4") (Ø3/4")×Ø1/2"
2 pcs 1 pc
13 10
[Ø 15.9×(Ø19.1)] [(Ø19.1)×Ø12.7]
T-joint 3-Ø3/4"
1 pc
[3-Ø19.1]
1 pc Locally procured
(Ø7/8") (Ø7/8") (Ø7/8")
71 73
3-Ø7/8"
Ø3/4" Ø3/4" Ø5/8"
Ø7/8"
18 14
18
14 85
(Ø7/8") (Ø7/8")
Ø5/8" Ø1/2"
No. Specifications No. Specifications
Ø3/4"×(Ø7/8") (Ø7/8")×Ø3/4"
1 pc 1 pc
18 18
[Ø19.1×(Ø22.2)] [(Ø22.2)×Ø19.1]
(Ø7/8")×Ø5/8"
1 pc
14
[(Ø22.2)×Ø15.9]
(Ø7/8")×Ø1/2"
1 pc
85
[(Ø22.2)×Ø12.7]
1 pc
1 pc
T-joint 3-Ø7/8"
1 pc
[3-Ø22.2]
1 pc Locally procured
EH98605001-2
Installation and connection
Select the model and the number of outdoor unit connection piping kits that you need based on the sales catalog, design engineering, and the
data book and installation manual of outdoor unit.
CAUTION
• When brazing the refrigerant pipes, be sure to put the nitrogen first to prevent from oxidizing the inner pipe. If not, the oxidization scale
brings the refrigerant cycle clogging and result in malfunction.
• Use clean new pipes for the refrigerant pipes, and do not let water, moisture or dust get into the pipes during installation.
1
Installation mode
<Gas joint>
Install them horizontally with a maximum gradient of ±15° for even distribution. (Do not install them perpendicularly or upright.)
(Figure 4, Figure 5, Figure 6, Figure 7)
A
<Liquid/balance pipe joint>
No restrictions on the installation orientation by the direction of refrigerant flow. However, on the liquid joint the installation cannot have the
refrigerant from the main pipe flow directly into the header unit. (Figure 2).
Unit: inch
[Unit: mm]
A
Balance pipe joint
▼ Liquid pipes
Figure 1
Header unit A Follower unit B
Correct
–
Main pipe
2 pcs
To indoor unit
Liquid joint
▼ Gas pipes
1 pc
Figure 3
Header unit A Follower unit B
Correct
3-Ø3/8"
Main pipe
To indoor unit
Gas joint
1 pc <Gas joint upright orientation installation>
Figure 5
2 pcs
Header unit A
–
1 pc
Incorrect
T-joint 3-Ø3/8"
Main pipe
1 pc 1 pc
[3-Ø9.5]
Locally procured
To indoor unit
Gas joint
Horizontal line Horizontal line
Within ±15°
A view
B
Horizontal line
A view
Figure 2
Follower unit C Header unit A
Incorrect
To indoor unit
Extension valve installation site
(For planned system expansion)
<Gas joint reverse orientation installation>
Figure 4
Follower unit C
Header unit A
Incorrect
Main pipe
Extension valve installation site
To indoor unit
(For planned system expansion)
<Vertical installation>
Figure 6
Follower unit B Header unit A
A view
Gas joint
Incorrect
Unit
A
Gas joint
Vartical line
Within ±15°
B view
A view
Horizontal line
Follower unit B Follower unit C
Main pipe
Follower unit B Follower unit C
Gas joint Gas joint
<Vertical installation>
Figure 7
Header unit A
Incorrect
Gas joint