Table of Contents
Advertisement
28
www.aeg.com
With the flap in the
position DOWN:
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
12.5 Setting a program
1. Turn the program dial to select the
desired washing program. The
related program indicator comes on.
The indicator of the Start/Pause
button flashes.
The display shows the maximum
declared load for the program, the
default temperature, the default spin
speed, the washing phase indicators
(when available) and an indicative
program duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators come on in the
display and the given information
changes accordingly.
• Do not use gelatinous
or thick liquid
detergents.
• Do not put more
liquid detergent than
the limit shown on the
flap.
• Do not set the
prewash phase.
• Do not set the delay
start function.
In case a selection is not
possible, no indicator
comes on and an acoustic
signal sounds.
12.6 Starting a program
Touch the Start/Pause
the program.
The related indicator stops flashing and
stays on.
In the display, the indicator of the
operating phase starts flashing.
The program starts, the door is locked.
The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
12.7 Starting a program with
the delay start
1. Touch this repeatedly until the
display shows the desired delay time.
The indicator
2. Touch the Start/Pause
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
program starts.
The ProSense estimation
starts at the end of the
countdown.
Cancelling the delay start
after the countdown has
started
To cancel the delay start:
1. Touch the Start/Pause
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows
3. Touch the Start/Pause
again to start the program
immediately.
button to start
comes on.
button.
button to
.
button
Advertisement
Table of Contents
