Tools Menu; Radio Device Settings; Position Settings; Method For Checking Blade Elevation - Komatsu D61EXi-24 Operation & Maintenance Manual

HANDLE CONTROL BOX

TOOLS MENU

On "Tools" menu, you can measure the jobsite land form and blade edge position by coordinates and configure
the radio.

RADIO DEVICE SETTINGS

For the settings of radio, see "METHOD FOR CONFIGURING RADIOS (3-20)".

POSITION SETTINGS

METHOD FOR CHECKING BLADE ELEVATION

When checking the blade elevation, perform the following procedure.
1.
On the main window, press "iB logo key" and display the
main menu.
2.
On "Tools" menu, press "Position check..." and select.
3.
On "Position Check" screen, select "Point:".
Select the setting position of blade edge from "Blade: Left",
"Blade: Middle", and "Blade: Right".
4.
Press "Measure...".
After the measurement is finished, the coordinates of the
measuring point of the selected blade edge is displayed on
"Position Check" screen.
5.
Press "Save".

TOOLS MENU

AJD02635
AJD02636
AJD02593
4-43