LG -D295 Service Manual page 100

3.6.1.3 Checking RF signal path (TX Module)
START
Check TP1(C1102) at U1100
Check if there is any major difference referring
To Figure 3.6.1(b). Is any signal detected at that
point?
Check TP2(C1607) at FL1600
Check if there is any major difference referring
To Figure 3.6.1(c). Is any signal detected at that
point?
Is any signal detected at
that point ?
TX module is OK. See next page to check DPX
LGE Internal Use Only
No
Yes
No
Yes
No
Yes
- 100 -
3. TROUBLE SHOOTING
Check C1101,C1102
Check TP3(C1123),TP4(C1124), TP5(C1119),
TP6(C1120) at U1102. Is any DC signal detected
at that point ?
Replace U1100
Check C1607
The Problem may be Logic part
Refer to Logic troubleshoot
Copyright © 2014 LG Electronics. Inc. All right reserved.
Only for training and service purposes
No
Yes