Installation; Registering The Repeater To The Main Monitor Station (Registration/Cancellation); Lregistering The Repeater (Registration) - Panasonic VL-FAN2 Operating Instructions Manual

Installation

Registering the repeater to the main monitor station
(REGISTRATION/CANCELLATION)
To use the repeater, the registration to your main monitor station is required.
L T he repeater can only be registered to one main monitor station at a time.
Registering the repeater (REGISTRATION)
1
Connect the AC adaptor to a power outlet installed nearby the main monitor station.
L T he POWER indicator lights in green.
2
Perform the registration operations using the main monitor station.
L R ead "Setting a repeater" in the Operating Instructions included with the wireless video
intercom system.
3 Press and hold {PROGRAM} on the repeater for about 3 seconds within 2 minutes after
completing the main monitor station operations.
L T he STATUS indicator flashes in green and then lights up in green after completing the
registration.
(Depending on the radio signal status, the indicator may light in amber or red, or flash
in red instead of lighting in green.)
Flashing in green.
Lights in green.
12
Lights in green.
DC IN jack
AC adaptor
DC plug
To power outlet
(100 – 240 V AC)
{PROGRAM}