Alarm Operation - Jensen SAB-55B User Manual

Setting the Radio Station presets
The SAB-55B allows you to store up to 10 FM stations and 10 AM stations for easy
recall at any time.
1. In the FM or AM mode, tune to the radio station you want to store in memory by
using the TUNER UP BUTTON (#7) / TUNER DOWN BUTTON (#6).
2. Press STORE/ALARM BUTTON (#8). The MEMORY INDICATOR (#20) and the
PRESET CHANNEL NUMBER (#21) will BE flashing on display.
3. To change the preset channel number location, press the
/ TUNER DOWN BUTTON (#6) to step through the preset locations (1 –
4. To confirm the preset location, press the STORE/ALARM BUTTON (#8).
5.) To store up to 10 FM and 10AM station presets, repeat steps 1 to 4 above.
Recalling the Preset Radio Stations
1. Set the SAB-55B to Radio FM or AM mode.
2. Press the MEMORY / TIME BUTTON
station.
The SAB-55B has an alarm that will wake you up with a beeping sound.
The alarm beeper is built into the case so it is not necessary to connect earphones to
hear the alarm.
1. In Standby mode, press and hold the STORE/ALARM BUTTON (#8), the Hour
digits of the alarm time will blink and the ALARM INDICATOR
display.
2. Within three seconds, press the TUNER UP BUTTON (#7) / TUNER DOWN
BUTTON (#6) until the correct hour is reached.
3. Press the STORE/ALARM BUTTON (#8) again and the minute digits of alarm time
will blink.
4. Within three seconds, press the TUNER UP BUTTON (#7) / TUNER DOWN
BUTTON (#6) until the correct minute is reached.
5. Press the STORE/ALARM BUTTON (#8) to confirm the alarm time.
6. The Alarm will sound for 60 minutes at the time you entered.
TO STOP THE ALARM SOUND
When alarm sounds, press the STORE/ALARM BUTTON #8 or the POWER/BAND
BUTTON (#1) once to stop the alarm and it will repeat next day same time
TO COMPLETELY TO TURN OFF ALARM (NOT RESET FOR NEXT DAY)
In standby mode, press the STORE/ALARM BUTTON (#8) repeatedly until the ALARM
INDICATOR (#24) disappear.
(#9) repeatedly to select

ALARM OPERATION

E-7
TUNER UP BUTTON (#7)
10).
the desired preset
will show on the