Table of Contents
Advertisement
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page
Illustration A
Transport wheel
1
Storage for spray lance
2
Storage / parking position for high-pressure gun
3
Power Control spray lance dirt grinder for stubborn
4
dirt, pressure level: HARD
Vario Power Power Control spray lance for the most
5
common cleaning tasks, pressure levels: HARD /
MEDIUM / SOFT / MIX
Power Control high-pressure gun
6
Button for separating the high-pressure hose from
7
the high-pressure gun
High-pressure gun lever
8
Pressure indicator (MIX / 1-SOFT / 2-MEDIUM / 3-
9
HARD)
High-pressure gun lock
10
Trigger "0/OFF" / "I/ON"
11
Mains connection with mains plug
12
Storage hook for power cord
13
Carrying handle
14
Transport handle, telescoping
15
Quick coupling for high-pressure hose
16
Type plate
17
High-pressure hose
18
Detergent suction hose with detergent filter and cap
19
Detergent tank
20
Water connection with integrated sieve
21
Water connection coupling
22
**Garden hose with commonly available coupling
23
–
Fabric reinforced
–
Diameter of at least 1/2 inch (13 mm)
–
Length at least 7.5 m
*Washing brush, suitable for working with deter-
24
gents
*Foam nozzle for powerful detergent foam
25
*Detergent container
26
* optional, ** additionally required
Safety devices
CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
Power switch
The power switch prevents unintentional operation of
the device.
High-pressure gun lock
The lock locks the lever of the high-pressure gun and
prevents the device from starting unintentionally.
Auto-stop function
If the lever of the high-pressure gun is released, the
pressure switch turns off the pump and the high-pres-
sure jet stops. The pump switches on again when the le-
ver is pressed.
Symbols on the device
Do not aim the high-pressure jet may at per-
sons, animals, live electrical equipment or
the device itself.
Protect the device against frost.
The device may not be connected to the
public drinking water network.
For the illustrations, refer to the graphics page.
Fit the supplied loose parts onto the device before start-
ing up the device.
Fitting the wheels
1. Fasten and secure the wheels to the device.
Illustration B
Installing the handles
1. Attach the transport handle.
2. Attach the carrying handle.
Illustration C
Close the detergent tank
1. Close the detergent tank with the cover.
Illustration D
Installing the water connection coupling
1. Screw the water connection coupling onto the water
connection on the device.
Illustration E
Initial startup
1. Place the device on a flat and level surface.
2. Insert the high-pressure hose into the quick coupling
until it audibly latches into place.
Illustration F
3. Insert the high-pressure hose into the high-pressure
gun until it audibly latches into place.
Note
Take care to ensure the correct alignment of the nipple.
Illustration G
4. Check for a secure connection by pulling on the
high-pressure hose.
5. Plug the mains plug into a mains socket.
For the connection values, see the type plate or chapter
Technical data.
Observe the water distribution company regulations.
ATTENTION
Damage through contaminated water
Contamination in the water can damage the pump and
the accessories.
KÄRCHER recommends using the KÄRCHER water fil-
ter for protection(special accessory, order number
4.730-059).
English
Assembly
Water supply
7
Advertisement
Table of Contents
