Table of Contents
Advertisement
AXIS Camera Station S9002 Mk II Desktop Terminal
Configure your device
Configure your device
First-time configuration
After you have configured Windows®, AXIS Recorder Toolbox is opened automatically and you are guided through the first-time
configuration wizard. In this wizard, you can configure several basic and necessary settings before you manage your device in
AXIS Recorder Toolbox.
1. Change the computer name if you want and click Next.
2. Under Date and time, configure the following settings and click Next.
-
Select a time zone.
-
To set up an NTP server, select NTP server and enter the NTP server address.
-
To set manually, select Manual and select a date and time.
3. Under Network settings, configure the following settings and click Next.
-
Use automatic IP settings (DHCP) and Use automatic DNS settings are turned on by default.
-
If your device is connected to a network with a DHCP server, the assigned IP address, subnet mask, gateway, and
preferred DNS are automatically displayed.
-
If your device is not connected to a network or there is no DHCP server available, enter the IP address, subnet
mask, gateway, and preferred DNS manually depending on the network requirements.
4. Under Power settings,
-
Never put the computer to sleep and Never turn off the display are selected by default.
-
We recommend that you keep both options selected to make the live view and recordings available all the time.
You can always go to Start > Settings > System > Power & sleep to change the settings.
5. Click Finish. If you have changed the computer name, AXIS Recorder Toolbox will prompt you to restart the device.
Log in to AXIS Camera Station server
Through the AXIS Camera Station client, you can connect to a single server installed on the local computer or elsewhere on the
network, or to multiple servers.
Double-click the AXIS Camera Station icon to start the AXIS Camera Station client. You can connect to AXIS Camera Station
servers in the following ways:
To connect to the servers used in the previous session, select Last used servers.
To connect to the server installed on the same computer as the client, select This computer.
•
Select Log in as current user to log in as the current Windows user.
•
Clear Log in as current user and click Log in. Select Other user and provide another username and password to log
in with a different username and password.
•
Select Log in as <username> if you have your username and password remembered.
To connect to a remote server:
1. Select Remote server.
10
Advertisement
Table of Contents
